Cleaning the Heat Exchanger on a Samsung Dryer

Last Update date : Sep 24. 2024

Information Icon Please Note: The information on this page is for Australian products only. Models, sequences, error codes or settings will vary depending on location and/or where the product had been purchased. To be redirected to your local support page please click here.

When you have finished running a cycle in your Samsung Dryer and find that the load hasn't dried properly, even after cleaning the lint filter and vent lines, and also ensuring you have only put in a small load, it could mean that the heat exchanger needs to be cleaned.

It is recommended to clean the heat exchanger at least once a month. Some dryers even have an indicator that lights up to let you know when it needs cleaning. Please note that the indicator alert will continue to light up after each cycle, as it is recommended for you clean the heat exchanger after every cycle. A dirty heat exchanger will hinder the product's performance and should be cleaned regularly.

After a drying cycle, open the dryer door and the heat exchanger cover to maintain the dryer interior more hygienically. The heat exchanger will be wet right after a cycle so it is important to wait a few hours to let it completely dry before cleaning

Below are instructions on how to take out the heat exchanger and clean it.

Note:

  • This page is applicable for Heat Pump Smart Dryers ONLY. This page is NOT applicable for Washer/Dryer Combos.
  • Water droplets can form around the heat exchanger due to condensation caused by a temperature difference. This is normal and is not a sign of a leak.
  • If you are not planning on using the dryer for a long period of time, open the heat exchanger cover and ventilate.
1 Gently press the top part of the outer cover (A) - located at the bottom left of the dryer - to open.
*This also may be located on the bottom right of your dryer.
Heat exchanger panel
2 Unlock the levers (B), and then pull the inner cover to remove.
Locking mechanisms
3 Clean the heat exchanger with the provided cleaning brush, OR a vacuum cleaner with a brush attachment. Take care not to bend or damage the heat exchanger fins when cleaning. This may lead to a decrease in drying performance.
Heat exchanger

CAUTION:

  • To avoid physical injury and burns, do not touch or clean the heat exchanger with your bare hands.
  • Do not use water to clean the heat exchanger.
  • Do not bend or damage the heat exchanger fins when cleaning.

Note: If the heat exchanger is completely dry and therefore hard to clean, spray some water on the heat exchanger and clean using a brush.

4 Clean the inner cover with a smooth damp cloth.
There may be moisture and/or foreign substances around the inner corner.
Cleaning inner cover.
5 Reinsert the inner cover to its original position and the lock the inner cover by using the levers.
Reinserting inner cover.
6 Close the outer cover, and make sure the levers are locked.

Note:

  • After cleaning the heat exchanger, tap the circle button to dismiss the notification message. The message remains on until you dismiss it.
  • If the alarm continues after you have dismissed it, unplug and then plug in the power cord or remove and reinsert the heat exchanger's inner cover.

For further assistance, please contact our Chat Support or technical experts on 1300 362 603. To find your Samsung product's User Manual, head to Manuals & Downloads.

Thank you for your feedback!