How to use your Samsung Odyssey Ark Gaming Monitor

1. Audio Port (3.5 mm Jack): Connects to an audio output device such as headphones.
   
   
2. USB-C: Connects to a USB camera.
   Note: This port does not support media content playback. To play media content, use the USB port on the One Connect box.
   
   
3. ONE CONNECT: Use the provided One Invisible Connection cable to connect the Odyssey Ark to the One Connect box.
   
   
4. USB 2.0 (5V 0.5A): Connects to a USB device.
   Note: This USB port on the product is able to use a maximum constant current of 0.5 A. If the maximum value is exceeded, the USB port may not work.
   
   
5. USB 2.0 (HDD 5V 1A): Connects to a USB device or USB external hard drive.
   Note: This USB port on the product is able to use a maximum constant current of 1.0 A. If the maximum value is exceeded, the USB port may not work.
   
   
6. USB: Connects to a PC using a USB cable. This port is compatible with USB 2.0 cables.
   
   
7. EX-LINK: Intended for service technicians.
   
   
8. Power
   
   
9. Optical: Connects to an audio device using an optical (digital) cable.
   
   
10. LAN: Uses Cat7 (Shielded Twisted Pair Type) cable for the connection (10/100 Mbps).
    
    
11. HDMI 1 - 4: Connects to a source device using an HDMI cable or HDMI-DVI cable (HDMI3; HDMI-eARC).
    
    
12. ONE CONNECT: Use the provided One Invisible Connection cable to connect the Odyssey Ark to the One Connect box.

The Ark Dial puts the player in full control of the Odyssey Ark, allowing quick and simple access to a variety of functions. These include Flex Move Screen, Multi View, Quick Settings, and Game Bar.

1. Solar Cell: Exposing the Solar Cell to light when the remote is not in use will charge the battery.
   Note: For fast charging, connect the charging cable to the USB-C port on the lower left corner.
   
   
2. LED: The LED on the front will light up when charging. When the battery is fully charged, the LED will turn off.
   Note: This function may not be supported depending on the model or geographical area.
   
   
3. Power: Press to turn the Odyssey Ark on or off.
   
   
4. Source: Press to change the input source. Press repeatedly to cycle through the available input sources.
   
   
5. Return: Press to return to the previous menu.
   
   
6. Volume: Move the button up or down to adjust the volume.
   
   
7. Enter: Selects or runs an item.
   
   
8. Ark Dial Menu: Displays the Ark Dial Menu.
   
   
9. Wheel: Turn the wheel to move the focus, adjust the screen size, or adjust the screen position.
   Note: The functionality may differ depending on the apps supported by the Odyssey Ark. On certain screens, the wheel will not work, so please use the directional buttons instead. Use the directional buttons if necessary. There may be a sound from the wheel when in use. The focus moves when the sensor detects turning of the wheel, and the movement may not be simultaneous with the wheel turning sound.
   
   
10. Directional buttons: Use the directional buttons to move the focus or adjust the screen position.

1. Quick Settings: Quick Settings can be used to quickly configure frequently used features.
   
   
2. Flex Move Screen: You can use the Ark Dial to change the screen size or position. Spin the wheel left or right to zoom in or out on the screen, or use the directional buttons to move the screen position.
   
   
3. Home: Press to return to the Home Screen.
   
   
4. Multi View: You can simultaneously view multiple split screens.
   
   
5. Game Bar: Easily control the Game Settings and Game Enhancer Settings using the Game Bar.

1.    Press the Home button on the remote, and then navigate to Menu.

2.    Select Settings, and then select All Settings.

3.    Select General & Privacy, and then select Power and Energy Saving.

4.    Select Available Ark Dial Battery.

The Odyssey Ark can be turned on by pressing the Power button on the back of the Ark. You can then use the on-screen Control Menu.

●       Home: The Home screen will display.

●       Settings: Change your desired monitor settings. When Game Mode is turned on, you can press and hold the Settings button to run the Game Bar.

●       Return: Exits the function menu screen.

●       Source: You can change the input source. The external input will be displayed on the bottom of the screen.

●       Power off: The monitor will turn off.

●       Power button: Displays the Control Menu. Select or run a focused item on the menu.

●       Up/Down buttons: Moves the cursor up or down, or changes the channels when using broadcast-related app.

●       Left/Right buttons: Moves the cursor left or right, or changes the volume.

Note: The buttons may work differently depending on the situation.

●       You can enable or disable the microphone by using the switch at the bottom of the Odyssey Ark. If the microphone is turned off, all microphone-related voice and sound features will not be available.

●       The position and shape of the microphone switch may differ depending on the model.

●       Microphone data will not be saved.

●       The LED will turn on when the Odyssey Ark is turned off.

●       The LED will blink when the Odyssey Ark enters standby mode.

Note: When 60 seconds elapses with no signal, the Odyssey Ark will enter standby mode. In standby mode, the screen turns on again when any signal is input or any button is pressed on the remote control.

●       The color and shape of certain parts may differ from what is shown.

●       When using the buttons (excluding the Power button) on the Samsung Smart Remote, the receiver LED will not blink.

With Eclipse Lighting, you can create your own unique lighting effects while gaming.

1.    Press the Home button on the remote, and then navigate to Menu.

2.    Select Settings, and then select All Settings.

3.    Select General & Privacy, and then select Eclipse Lighting.

4.    From here, you can enable the screen’s LED lighting and select different effects or colors.

5.    Select Eclipse Sync to synchronize the lighting effect with your on-screen gameplay.

Active Ambient allows you to select a pattern or background for your screen. A variety of choices are available.

1.    Press the Home button on the remote, and then navigate to Menu.

2.    Select Settings, and then select All Settings.

3.    Select General & Privacy, and then select Active Ambient.

4.    Then, select your desired pattern or background.

The Multi View feature allows you to display up to 4 screens at once (or 3 screens when in vertical Cockpit Mode). Plus, built-in app such as YouTube is compatible with Multi View. This means you can play, stream, browse, and watch content all at the same time. Just press the Multi View button on the remote control or press the Ark Dial Menu button on the Ark Dial, and then select Multi View.

Select the link for more information on using Multi View.

The optimal and recommended resolutions are 3840 x 2160 @ 165 Hz. If you cannot use 3840x2160@165 Hz resolution, please enable Game Mode. Press the Home button on the remote, then select Menu, and then select Settings. Select All Settings, then select Game, and then select Game Mode.

●       Game Mode: ON → Native resolution is 3840 x 2160 @ 165Hz

●       Game Mode: OFF, Input Signal Plus: ON → Native resolution is 3840 x 2160 @ 120Hz

●       Game Mode: OFF, Input Signal Plus: OFF → Native resolution is 3840 x 2160 @ 30Hz

Make sure that your PC’s graphic card supports 3840 x 2160 @ 165 Hz and the graphic card driver is up to date. Use a certified compatible HDMI cable when connecting.

When the PC screen does not appear or the PC is not recognized, check the PC’s power supply and then reconnect the HDMI cable. If the symptom persists, check that the PC is not in Sleep mode and then set the Input Signal Plus to ON. Press the Home button on the remote, then select Menu, and then select Settings. Select All Settings, then select Connection, and then select External Device Manager. Select Input Signal Plus.

To fix this, edit the name of the external device. When connecting to a PC, the name must be edited to “PC.” Press the Home button on the remote, then select Menu, and then select Connected Devices. Select HDMI, and then select Edit to edit the name. You can also try adjusting the screen magnification or text type in the PC operating system (OS).

You can choose to use USB devices from your monitor or from a source device connected to the USB Hub. Press the Home button on the remote, then select Menu, and then select Settings. Select All Settings, then select Connection, and then select External Device Manager. Select USB Source Setup.