How do I Clean the Air Purifier Filters?

Detach filters

Before detaching the air purifier filters, be sure to turn off the appliance and unplug the power cord.

• To detach the front panel, use your thumbs to press the top of the panel and pull forward using your other fingers.
• To remove the Pre-filter, push the button on the top of the Pre-filter and pull it out slowly.
• To remove the 2-in-1 filter, push the filter holder clockwise to release and then remove the filter slowly.

Dust and clean the Pre-filter

• If the panel is covered with excessive dust, use a vacuum cleaner to remove as much as possible. Use a soft brush to remove dust or debris on the filter. Be careful not to tear or damage the Pre-filter.
  
• Soak the Pre-filter in lukewarm water for about 10 minutes after adding a neutral detergent. Rinse the filter under running water. (If necessary, use a soft brush to remove dust. Do not rub strongly however, as the Pre-filter may tear.)
• Place the filters in a well-ventilated dry space in the shade. Keep the filter out of direct sunlight. Please note that the 2-in-1 filter cannot be washed. Be careful not to get the 2-in-1 filter wet.