How to Reduce Apparent Temperature When Using an Air Conditioner

When air conditioners are frequently used, especially in the summer, the appliance may judge that it is in a low voltage environment itself due to power problems.

In the event of a power supply problem, the air conditioner operates by lowering the operating frequency, which increases the outgoing air temperature. It will make you think that the room is getting hotter.

Ensure the power supply is stable. You should check if there is or has been any voltage fluctuations. You can install stabilizers if necessary, to ensure a stable power supply.

• In case of frequent power outages
  
• If the air conditioner outdoor power supply is cut off
• In case of using the air conditioner without installing the stabilizer (If the stabilizer not connected, the cooling performance will be reduced more at low voltage conditions.)

The increase in energy usage can cause power grids to overload, leading to widespread power outages. The power supply of the air conditioner will be cut off due to a power outage. When the air conditioner function is restored it will automatically operate at the previous settings when the power is back.

• If the voltage is cut off due to a power outage while using the air conditioner, the compressor will operate after approximately 3 minutes of a power outage. 
• Under this situation, the indoor unit will operate for 3 minutes first, and later the compressor will operate for 3 minutes, and the cooling air will come out.
• After the power supply is restored, the machine will operate automatically.

If the room temperature is high and the outgoing air temperature of the air conditioner differs by less than 10 degrees, you may feel the power of the air conditioner is weak. 

If there is no problem with the appliance operation, check the set operation mode first. If the device is operating in low wind mode, the cooling power will be weakened. 

• Set the temperature lower.
• Set the Turbo Mode (max operation time for 30 minutes)
• Change the Wind Volume (Strong)

When the air conditioner is running constantly, the air conditioner filters become clogged faster than normal. Moreover, the fan on the outdoor unit may accumulate debris much quicker.

If the filter has not been cleaned for more than a month, it can cause a clogged filter due to lack of air circulation. A high level of dust in the filter may reduce the wind or cause abnormal noise. This can affect the air conditioner cooling power and can make the temperature feel warmer.

• For enjoyable fresh, clean air, it is recommended to clean the air conditioner filter and upper cover every 2 weeks. 
• Clean the filter when the CF code appears on the indoor unit display. After cleaning and reinstalling the filter, reset the filter cleaning reminder. 
• If the use environment is subject to excessive dust exposure, filter dust blockage may occur before the CF code appears on the indoor unit.

It's important to choose an air conditioner that fits in your space. Choosing the right size is vital to maximize performance and minimize running costs. Please note that when the size of the room space is larger than the air conditioner capacity, the air conditioner takes more time to decrease the temperature in the space. 

Always remember that bigger isn't always better, and smaller isn't always more economical.

The air conditioner may run frequent short cycles to achieve the target temperature. It means the room gets too hot or cold.

• The unit doesn't dehumidify the air enough (so the room feels less comfortable)
• Power use increases
• Running costs increase

The air conditioner may have to run at maximum output more often. It means the air conditioner dries out the air too much.

If refrigerant gas is in shortage with leakage due to installation faults, cooling performance will reduce slowly, and the C422 error message will come up in the end.

If the C422 message is showing, please contact the nearest Samsung service center for further support.