Galaxy Phone Water Resistance

The water resistance of Galaxy phones is not permanent and may be naturally weakened over time or through natural wear and tear.

When using products with water resistance observe the following points to prolong the supplied level of protection.

• Do not immerse the product in water below 1 metre for IPx7 phones or 1.5 metres for IPx8 rated phones for more than 30 minutes.
  

• Do not expose the product to unclean water or liquids (salt water, pool water, soapy water, oils, perfumes, sunscreen, hand sanitizer, chemicals such as cosmetics, liquids containing alcohol, etc).
  

• Do not expose the product to high water pressure.

• Do not use the product in abnormal temperatures such as saunas and steam rooms, or in places with high humidity.

• Do not drop, hit or cause any to shock the product.

• Use the supplied tray release pin to remove the SIM card tray of the product and push it in completely to avoid gaps when reinserting the SIM card tray. Also, be careful not to let foreign objects get into the SIM card tray and grooves. 

If a water-resistant device is exposed to water, liquid, or contaminants, follow these instructions:

• Wipe with a soft, clean cloth to dry thoroughly.
  

• Do not connect the charger or accessories until the product is completely dry. Connecting the charger or accessories while the external connection jack is not completely dry may damage the product.
  

• If the microphone, speaker or receiver is not completely dry, the quality of voice calls or audio may be affected. 
  

If a product that is not water resistant is exposed to water, liquid, or contaminants, follow these instructions:

• Quickly remove the SIM, SD card, etc. from the product.
  

• Dry with a dry towel and visit Samsung Electronics Service Centre.

• If it is difficult to visit the prompt service centre, please dry it in a well-ventilated, low-light place with a cool breeze.

• Even after drying moisture may remain inside the product, so do not turn it on, and have it checked by a service centre as soon as possible.
  

In addition, do not use heating devices such as hair dryers to dry the product, and do not use soap, detergents, abrasive substances, other chemicals, compressed air, or use ultrasonic or external heat sources to clean the product.

Failure to follow the precautions may cause damage to the product such as discoloration or corrosion.