Explain Resolution Selection, BD Wise, and Anynet+

HDMI (High Definition Multimedia Interface) is an interface that enables the digital transmission of video and audio data with just a single connector.

When using an HDMI connection, the DVD Home Theater transmits DVD video signal digitally without the process of converting to Analogue. The result is a sharper digital pictures on your TV.

Resolution Selection

This function allows you to select the screen resolution for HDMI output.

In Stop mode, press and hold the SD/HD (Standard Definition/High Definition) button on the remote control until the resolution changes.

• Resolutions available for the HDMI output are 480p, 720p, 1080i/1080p
• SD (Standard Definition) resolution is 480p and HD (High Definition) resolution is 720p, 1080i/1080p

BD Wise (Samsung products only)

You can select to use the BD Wise menu only if the Samsung home theater is connected to a Samsung TV that supports BD Wise using an HDMI cable.

What is BD Wise?

BD Wise automatically adjusts BD Wise-compliant Samsung products to the optimal settings between them. This feature is enabled only if BD Wise-compliant Samsung products are connected to each other using an HDMI cable.

To use BD Wise

1) Use an HDMI cable to connect the Samsung home theater to a BD Wise-compliant Samsung TV
2) Set each BD Wise menu of the Samsung home theater and the Samsung TV to On, respectively

- This will optimize the picture quality according to the content (In the disc, DVD, etc) that you want to play
- This will also optimize the picture quality between the home theater and your BD Wise-compliant Samsung TV

Using Anynet+ (HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control.

Anynet + can be used by connecting this Home Cinema to a SAMSUNG TV using a HDMI Cable. This is only available with SAMSUNG TV's that support Anynet+.

Follow these steps below:

1. Connect the main unit of the Home Cinema to a Samsung TV with an HDMI cable
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information)

You can operate the Home Cinema by using the TV remote control. (Available TV buttons : Backward, Stop, Play, Forward buttons, ▲,▼ and ◀,▶ buttons, 0 ~ 9 buttons).

If you select the TV

Set the Anynet+ (HDMI-CEC) to On by pressing the Anynet+ button on your TV remote control.

• Receiver On : You can listen to audio through the Home Cinema
• Receiver Off: You can listen to audio through the TV

If you select the THEATER

Select THEATER to connect and set the option of each item below.

• View TV: If Anynet+(HDMI CEC) is set to on and Select View TV is selected, the home cinema will automatically switch to digital in mode
• Theater Menu: You can access and control the Home cinema menu
• Theater Operation: The Home Cinema disc playback information will be displayed. You can control the Disc operation of the Home Cinema such as title, chapter and subtitle change
• Receiver On: You can listen to audio through the Home Cinema
• Receiver Off: You can listen to audio through the TV